How to use high temperature glue
Time：2012-11-07 11:06:12 Hits：1645
High temperature glue for 105 ℃ high temperature and 120 ° C cycle high temperature resistance.High temperature glue for rubber, high strength, resistant to 120 ° C.
Use
JL-496 high temperature glue use a dry cotton cloth or sandpaper will then remove surface dust, oil, rust, cleaning agents wipe with acetone or trichlorethylene, then clean the surface.
Unscrew the front cover of the JL-496 high temperature glue, you can use the bottle if any glue first with cotton cloth glue wipe clean, then put needles or PE dropper after use, to control glue traffic, to ensure bonding effect.
JL-496 high temperature glue then face a small drop of high temperature type instant glue adhesive, instantly bonding, and keep to the hardening date, ranging hardening time of a few seconds. High temperature glue for about 30 minutes to reach the practical strength, maximum strength can be obtained after 24 hours.
JL-496 high temperature glue clean up the bottle and tighten the lid.
JL-496 high temperature glue finished set the glue is stored in a cool dry place.
