The ABS glue the use
Time：2012-09-25 13:22:14 Hits：1561
ABS glue to use:
1. Surface treatment: first with a surface treatment agent to remove oil or dust on the surface of the plastic.
2. Glue: The glue should be uniform thickness, in place, without leaving any adhesive blind spot.
3. Fit, glue immediately after the material to be bonded lamination.
ABS Notes glue:
1, the glue flammable, although to be stored in a cool, well-ventilated place, avoid direct sunlight and use, subject to the rules of flammable storage storage transportation, attention to ventilation and prevent contact with fire.
2, after the glue used should always be covered, in order to avoid solvent evaporation, such as glue is too thick, available ethyl acetate, and diluted with acetone.
This product shelf life of six months, expired inspection can still use.
